Polaroid PDF-750W - Troubleshooting Guide

Auto-Power Frequency: Long press the Bi Buttons to set days of week;
Default: Long press the PIE Button to set default, and Mland Hd Buttons to
select yes / no
Version: Long press the pil Button to see the version
Troubleshooting
No power The power connector is not completely inserted into the
DC IN Jack.
The unit may have malfunctioned. Switch it off and wait
Screen freezes
a few minutes before turning it on again.
Characters in display are
incorrect
Make sure that you have selected the correct
language.
Unable to insert memory
card or USB device.
Memory card or USB device is not inserted correctly;
insert the card in the opposite side.
The unit cannot
recognize the memory
device inserted.
1. Memory card or USB device is not inserted correctly.
2. The memory device may be damaged. Try a different
card/device.
3. Make sure that you are using a memory card type
that is compatible (SD/MMC).
4. It is slow to read the large capacity memory device; wait
for a moment.
5. USB drive is formatted with an incompatible file system.
Make sure drive is formatted as FAT32.
NOTE: Not all USB devices or memory cards are
recognized by this digital photo frame.
A memory card or USB
device is inserted in the
frame, but it is not able to
read the card or USB
device.
1. Make sure you are using a memory card or USB
device that is compatible.
2. Make sure that the memory card or USB device is
inserted completely.
3. The memory card or USB device is damaged.
(12)