Troubleshooting
Repeated spots: If a repeated
spot or bar pattern appears on the
picture, the rollers inside the camera
need cleaning.
Ifs best to check the roll ers each
time you load film.
To clean the rollers: ln dim light,
open the film door and depress the
light shield (A). Rotate the rollers
(B). Remove any specks of dirt with
a clean, lint-free cloth, moistened
with water if necessary. Check the
raised ends (C) on the top roller;
dirt can collect there too.
Should you need to clean the
picture exit slot (0), insert a stiff
piece of paper (Iike the film cover)
in front of the rollers and under the
light shield. Push, until jt comes out
the picture exit slot.
32
o
B
A
To Next Page
Loading...
