The TUN ING Menu
The TUNING menu is used to adjust the signal source, channel
setup and reception of the TV.
CHANNEL Use the VOL / buttons on the remote
control (or t
SOURCE Selects AIR or CABLE. Select AIR to receive a
broadcast signal. Select CABLE to receive a
CATV signal.
he VOL / buttons on the
front of the TV) to scroll through the channels
available. You can enter the channel num ber
directly using the number buttons.
DELETE CH Select YES to remove t he channel.
Select NO to enter to the channel.
LABEL To add a channel description:
1. Open the OSD and se lect the TUNING menu.
2. Enter the channel you want to add a description for in the CHANNEL option.
3. Select the LABEL option.
4. Press the VOL button, then enter the first character of your description within one second.
After you enter the first character, the cursor moves to the next character.
5. Enter the rest of characters. After you enter the fifth character, you description is saved. You
m ust enter the f ive characters, or the label will not be saved.
6. If you want to erase a description, repeat this task and press VOL button to delete the
characters.
AUTO SEARCH Starts channel sea rch and stores the ch annels automatically. Use the VOL /
buttons on the remote control to begin the auto search. If you wish to stop the
search before completed, press MENU.
DELETE CH NO
CHANNEL 8
SOURCE AIR
LABEL AAAAA
AUTO SEARCH
TUNING
Using TV Menus
Using TV Menus
To Next Page
Loading...
