Stand and Control Box Removal
Lay TV flat on workbench. Be careful to protect the front bezel and LCD screen from being scratched. Use
protective cloth between work bench and TV front.
Note: Before disassembly of any part the TV, make sure the power is OFF, and the
power cord is removed from the wall outlet. Allow time for power within all system
boards to discharge before you begin disassembly. Never insert any objects into the
vent holes in the TV case.
(1) Remove 6 screws (A) from the TV Stand.
(2) Remove 3 screws (A) from the Control Box Cover, and remove the Cover from the TV.
www.polaroid.com
21
A
A
To Next Page
Loading...