(3) Remove 6 screws (A) from the Control Box.
(4) Lift the Control Box upwards, and then towards the bottom of the TV to unhook it.
(5) Remove the aluminum foil and bracket from the end of the Control Box. Unplug the 2 cables (A) from the Control
Box, and remove the Box from the TV.
Note: Before returning this product to the end user, you must follow the steps
outlined in the section,
Before Returning This Product to the User, on page 19. This
procedure ensures that the chassis will not cause electric shock.
www.polaroid.com
22
A
A
To Next Page
Loading...