Micro Maestro as the brains of a tiny
hexapod robot.
Serial servo controller for multi-servo projects (e.g. robot arms, animatronics, fun-
house displays) based on microcontroller boards such as the BASIC Stamp, Orangutan
robot controllers, or Arduino platforms
Computer-based servo control over USB port
Computer interface for sensors and other electronics:
Read a gyro or accelerometer from a computer for novel user interfaces
Control a string of ShiftBrites from a computer for mood lighting
General I/O expansion for microcontroller projects
Programmable, self-contained Halloween or Christmas display controller that
responds to sensors
Self-contained servo tester
An example setup using a Micro Maestro to control a ShiftBar and Satellite LED Module is shown
in the picture below and one of the videos above. Maestro source code to control a ShiftBar or
ShiftBrite is available in the Example scripts section of the Maestro User’s guide.
Connecting the Micro Maestro to a chain of ShiftBars. A single 12V
supply powers all of the devices.
Documentation on producer website.
To Previous Page
Loading...
Need help?
General
