Poly Plantronics Voyager Focus UC - Charging and Connectivity Accessories; USB Adapter LED Indicators

NOTE *Contents may vary by product.
NOTE Both the charge stand and micro USB cable can be plugged into either a computer or wall
charger. It is only necessary to plug the charge stand into a computer to update firmware.
To pair your headset and USB adapter again if it loses connection, put your headset and USB
adapter into pair mode (for the USB adapter, press the Bluetooth pairing button for 4 seconds
until the lights flash red and blue).
NOTE Adapter design may vary
Standard LEDs
USB LEDs What they mean
Flashing red and blue Pairing
Solid blue Headset connected
Flashing blue On a call
Solid red Mute active
Flashing purple Streaming media from computer
LEDs when Microsoft Teams* is detected
USB LEDs What they mean
Flashing red and blue Pairing
Solid purple Headset connected
Flashing blue On a call
Solid red Mute active
Pulsing purple Microsoft Teams notification
NOTE *Requires Microsoft Teams application
Charge stand*
USB Bluetooth adapter
4