Poly Savi 8420 Office - The Basics; Core Headset and Base Controls; Launching Microsoft Teams

The basics
Headset Controls
1
2
3
4
5
6
1 Volume wheel: Toggle repeatedly forward or backward to adjust volume
2 Call / Teams button: Press to place, answer, end a call or to interact with Microsoft
Teams (Teams model and Teams desktop app required)
3 Mute button: During a call, press to mute and unmute
4 Headset LED: Flashes when in use
5 Power button: Toggle on and off
6 ANC (Active Noise Canceling): Toggle on and off
Power on your headset
To turn on the headset, slide the Power button to reveal green.
Note: Headset design may vary.
Adjust volume
• Headset volume Fine-tune your headset volume by adjusting the headset's volume
up (+) and down (-) controls.
• Desk phone volume Adjust your base's volume settings when your voice or your
caller's voice is too quiet/loud during a desk phone call. Press and scroll the base
navigation wheel:
Advanced > Desk phone > Speaker or Mic > Adjust level. If your
voice is too quiet/loud, adjust the Mic volume. If your caller's voice is too loud/quiet,
adjust the Speaking
volume.
Note: To exit a menu, press the Back button on the left side of your base.
Adjust headset microphone volume (desk phone/softphone)
Place a test softphone call and adjust desk phone, softphone volume and PC sound
volume accordingly.
Launch Microsoft Teams (Teams model only)
You can easily open and use your Teams desktop application with your Microsoft Teams-
certified headset system.
Your base and headset each have a Teams button to quickly open and use the
Microsoft Teams desktop app. The base Teams button illuminates when you have a
meeting or notification.
13