EasyManua.ls Logo

Poly VVX D230 - Page 74

Poly VVX D230
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parameter Reference
73
X_SpoofCallerID Allows outbound Caller ID spoofing. If set to Yes,
device attempts to set the caller-id name and user id
field in the FROM header to that of a remote caller in
the case of a bridged call (from another trunk, such
as another SP Service).
Otherwise, device always its own account
information to form the FROM header.
Note that most service providers won’t allow
originating a call if the FROM header field doesn’t
match the account credentials. Enable this option
only if you’re sure that the service provider allows it.
No
X_UseRefer Enables using SIP REFER for call transfer. If
disabled, device bridges the call instead when
performing a call transfer (which consumes some
resources on the device).
Yes
X_ReferAOR Enables using the target's AOR (Address of Record
or public address) in Refer-To header of SIP REFER.
If disabled, the target's Contact is used instead.
Yes
X_HoldReferee Holds the Referee before a blind transfer if the call
isn’t placed on hold. This may allow reconnecting
with the Referee if the blind call transfer fails.
No
X_Use302ToCallForward Enables using the 302 response to INVITE for call
forward. If disabled, device bridges the call legs
instead when forwarding a call (and consumes some
resources on the device).
Yes
X_UserAgentName If a value is specified, device includes a User-Agent
header in all SIP Requests, or a Server header in all
SIP responses, that contains exactly the given value.
OBIHAI/${DM}-${FW
V}
X_ProcessDateHeader Enables the device to decode the DATE header sent
by the ITSP in a 200 response to its REGISTER. The
DATE header specifies the current GMT time and the
device can use to adjust its local time and date
without relying on NTP.
Yes
X_InsertRemotePartyID Enables the device to include a Remote-Party- ID
header in its outbound SIP INVITE to indicate to the
ITSP the caller’s preferred privacy setting (either full
or none).
Yes
X_EnforcePAssertedIdentity Take caller-ID from P-Asserted identity header only. No
X_InsertPPreferredIdentity Insert P-Preferred-Identity header in all outbound
INVITE.
No
X_InsertPrivacyHdr Inserts a ‘Privacy:id’ header in outbound INVITE for
anonymous calls.
No
ITSP Profile X – SIP Web Page (X = A, B, C, D, E, F, G, H) Settings Parameter Guide
Parameter Description Default Setting

Table of Contents

Other manuals for Poly VVX D230

Related product manuals