GP 44
Spare Parts - 2 -
SPARE PARTS CATALOGUE
INTRODUCTION
SCOPE
This spare parts catalogue has been prepared to allow the identification of the spare
parts needed to carryout the routine and preventive maintenance of the STRAPPING
MACHINE. The illustrations and tables contained are reserved technical information,
and may not be reproduced either partially or in total without the written authorization
of Polychem Corporation who are the exclusive owners of the information.
Polychem Corporation reserves the right to make any modifications they deem
necessary to the previously mentioned information.
Maintenance personnel and operators are forbidden from disclosing the information
contained in this catalogue and from using it for any purpose other than the
identification of spare parts.
It is suggested that this catalogue should be kept in good condition and in an easily
accessible place, where it can be reached quickly in case of an emergency.
Apply to Polychem Corporation for any further information.
CAUTION Use Polychem Corporation original spare parts only.
Polychem Corporation declines all responsibility for machine malfunctions that
may be caused by the use of non-original spare parts.
VALIDITY
The contents of this catalogue apply to the GP44 machines.
NOTE As each machine may have been subjected to variations with respect to the
standard configuration, any order for spare parts should include the following
identification data:
Plant/Contract No. ________________ Machine Serial No. ________________
End User ________________ Denomination ________________ Qty. _______
P/N __________________ Fig. _________________ Pos. _________________
Pay particular attention to the notes included in the spare parts listing.
FIGURES
The figures included in this catalogue are updated to the time of its edition. Following
the technical or commercial updating to which the machine enclosed with this
catalogue undergoes, some components might have an external shape different than the
shape depicted, although operation and interchangeability of the parts are the same.
UP-DATES
This catalogue is up-to-date on the issue date of its publication. For any further
updates, modifications or copies apply to:
Polychem Corporation
6277 Heisley Road
Mentor, Ohio 44060
To Next Page
Loading...