System Flags
Polycom, Inc. 194
HD_THRESHOLD_BITRATE The value of this flag is the system minimum
threshold bitrate for HD resolutions. The line rate
selected in the Conference Profile must be the same
of higher than specified by this flag.
Default value: 768 Kbps
Range: 384 Kbps - 4 Mbs
HW/VE No
HW_FOLLOW_SPEAKER_RESOL
UTION_ON_1X1_LAYOUT
Enables endpoints capable of higher resolution in a
conference where some endpoints are lower than
4CIF and others are higher to receive the Indication
icons.
Possible values:
• AUTO (default) - When any of the Indication icons
are configured for display, do not follow the
speaker. When the Indication icons are not
configured for display, follow the speaker.
• YES - Always follow the speaker in 1x1 layout.
• NO - Never follow the speaker in 1x1 layout.
HW No
IGNORE_AIM Audio Indicate Muted (AIM) is relevant to H.323
endpoints. When an endpoint mutes its microphone,
it does not necessarily mute its entire audio stream.
This allows sharing of content that includes audio
while microphones are muted.
Default value: NO
Possible values:
NO - When the AIM signal is received, the
participant is muted and a mute icon is displayed in
the RMX Web Client or RMX Manager.
YES - When the AIM signal is received, the
participant is not muted and a mute icon is not
displayed in the RMX Web Client or RMX Manager.
Range: YES, NO
HW Yes
RPCSVE_ENHANCE_CAPACITY Setting this flag to “YES” results in rejection of all
Mixed mode conferences, since in this case
AVC-only and SVC-only are the only conference
modes supported. This flag can be enabled to
achieve a higher capacity for a given hardware and
virtual machine configuration.
Default value: NO
Possible values: YES/NO
VE
General System Flags
Flag Name Description Platform Add?
To Next Page
Loading...
