System Flags
Polycom, Inc. 201
MAX_TRACE_LEVEL Indicates the debugging level for system support.
Default value: n
Possible values:
• TRACE = t
• DEBUG = d
• INFO_NORMAL = n
• INFO_HIGH = i
• WARN = w
• ERROR = e
• FATAL = f
• OFF = o
HW/VE Yes
MAXIMUM_RECORDING_LINKS The maximum number of Recording Links available
for selection in the Recording Links list and the
Conference Profile - Recording dialog box.
Default value: 20
Range: 1 - 100
HW/VE Yes
MCU_DISPLAY_NAME The MCU name that is displayed on the endpoint’s
screen when connecting to the conference.
Default value: Polycom RealPresence Collaboration
Server 1800, 2000, or 4000 (the last depends on the
product type).
HW/VE No
MEDIA_NIC_MTU_SIZE The maximum data payload size (bytes) transmitted
in a single packet over the network, and should be
minimally the MTU_SIZE (see below) to avoid
fragmenting of data packets.
The RealPresence Collaboration Server sends large
amount of data over the network and might be
required to adjust its MTU size according to the
network environment in which it is deployed.
Default value: 1,500
Range: 500-20,000. Values outside that range are
treated as 1,500.
HW/VE Yes
MIN_H239_HD1080_RATE Used to set the threshold line rate for HD Resolution
Content: the line rate at which the RealPresence
Collaboration Server will send Content at HD1080
Resolution. Setting the flag to 0 disables HD
Resolution Content.
Default value: 768 Kbps
HW/VE Yes
MIN_SYSTEM_DISK_SPACE_TO_
ALERT
Defines a minimum remaining the RealPresence
Collaboration Server disk capacity in megabytes.
Raises an active alarm if the remaining disk capacity
falls below this level.
Default value: 2048
HW/VE No
General System Flags
Flag Name Description Platform Add?
To Next Page
Loading...
