System Configuration Flags
Polycom®, Inc. 793
RMX2000_RTM_LAN This flag is used after installation on and RTM-LAN card to activate
the card. The flag must be set to YES. (RealPresence
Collaboration Server (RMX) 2000 only.)
RRQ_WITHOUT_GRQ To enable registration, some gatekeepers require sending first
RRQ and not GRQ.
Set flag to YES, if this behavior is required by the gatekeeper in
your environment.
Default: NO.
GRQ (Gatekeeper Request) - Gatekeeper discovery is the
process an endpoint uses to determine which gatekeeper to
register with.
RRQ - registration request sent to the gatekeeper.
RTCP_FIR_ENABLE When set to YES, the Full Intra Request (FIR) is sent as INFO
(and not RTCP).
Default = YES
RTCP_FLOW_CONTROL_TMMBR
_ENABLE
Enables/disables the SIP RTCP flow control parameter.
Default: YES
RTCP_FLOW_CONTROL_TMMBR
_INTERVAL
Modifies the interval (in seconds) of the TMMBR (Temporary
Maximum Media Stream Bit Rate) parameter for SIP RTCP flow
control.
Range: 5 - 999 (seconds)
Default: 180
RTCP_PLI_ENABLE When set to YES, the (Picture Loss Indication (PLI) is sent as
INFO (and not RTCP).
Default = YES
RTCP_QOS_IS_EQUAL_TO_RTP Range: YES/NO
Default: YES
RTV_MAX_BIT_RATE_FOR_FORC
E_CIF_PARTICIPANT
Enables the removal of empty video cells from a Video Layout.
The MCMS System Flags
Flag Description Add?
To Next Page
Loading...
