Appendix C - CDR Fields Unformatted File
Polycom®, Inc. 936
Default Number
Type
The type of telephone number, as follows:
0 - Unknown
1 - International
2 - National
3 - Network specific
4 - Subscriber
6 - Abbreviated
255 - Taken from Network Service, default
Notes:
• For dial-in participants, the only possible value is 255
• This field is only relevant to ISDN/PSTN participants.
Net Sub-Service
Name
Not supported.
This field remains empty.
Number of
Participant Phone
Numbers
The number of participant phone numbers.
n a dial-in connection, the participant phone number is the CLI (Calling Line Identification) as
identified by the MCU.
In a dial-out connection, participant phone numbers are the phone numbers dialed by the
MCU for each participant channel.
Note: This field is only relevant to ISDN/PSTN participants.
Number of MCU
Phone Numbers
The number of MCU phone numbers.
In a dial-in connection, the MCU phone number is the number dialed by the participant to
connect to the MCU.
In a dial-out connection, the MCU phone number is the MCU (CLI) number as seen by the
participant.
Note: This field is only relevant to ISDN/PSTN participants.
Party and MCU
Phone Numbers
No, one or more fields, one field for each participant and MCU phone number.
The participant phone numbers are listed first, followed by the MCU phone numbers.
Note: This field is only relevant to ISDN/PSTN participants.
Identification
Method
The method by which the destination conference is identified, as follows:
1 - Called phone number, IP address or alias
2 - Calling phone number, IP address or alias
Note: This field is only relevant to dial-in participants.
Meet Me Method The meet-me per method. Currently the only value is:
3 - Meet-me per participant
Note: This field is only relevant to dial-in participants.
Event Fields for Events 10, 101, 105 - DEFINED PARTICIPANT, USER ADD PARTICIPANT, USER UPDATE
PARTICIPANT
Field Description
To Next Page
Loading...
