Material Drying Time Power Level
Level 3
PolySupport™ for PA12
PLA
PETG
ABS
ASA
TPU
PA
PC
PVA
6 hours
PVB
18 hours
PolySupport™
6 hours
6 hours
6 hours
6 hours
12 hours
18 hours
6 hours
24 hours
12 hours
When factors, such as environmental temperature, humidity and storage time are
dierent, the drying times and power level can be adjusted accordingly. The drying
time recommendation is based on the condition of the testing samples which were
exposed to an environment of 25°C and 70% RH for 5 days.
Recommended power level and drying time
Level 1
Level 2
3
EN
To Next Page