3-6
IN CASE OF EMERGENCY
removed before operating jack.
• Operate
jack
with slow, smooth motion.
• Raise
car
so inflated spare tire will
just
clear
surface. FLEXIBLE
BUMPER
FACE BAR, GRILLE
AND
BODY
PANELS
WILL
TEMPORARILY DEFORM
DURING JACKING.
THIS
IS
NORMAL. ALL
PARTS
WILL
RETURN
TO THEIR ORIGINAL
SHAPE
WHEN
THE
JACK IS
REMOVED.
•
Install wheel and replace wheel nuts
with cone-shaped end toward wheel.
Then
slightly tighten each nut. Wheel
must be seated on hub.
• Place lever
in
"down" position.
• Lower
car
and fully tighten wheel nuts by applying clockwise
pressure near end of wrench as shown.
WHEEL NUT TORQUE
To Next Page
Loading...
