EasyManua.ls Logo

Pontiac 1994 Firebird - Page 121

Pontiac 1994 Firebird
290 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Comfort
Controls
and
Audid
Systems
Forward
Press and hold
“FWD’
to quickly
advance within a track. Release it to
resume playing. The radio will play
during this operation.
Random
Press
“RDM’
to hear a random selection
of tracks.
To
Stop
the Disc Player
Turn the power
off
or turn the ignition
key
off.
The disc stays in the player
and will resume,playing at the point
where it stopped.
Press
“AM/FM’
to stop playing the
disc and switch to radio. Press
“CDPLAY” to restart the disc at the
point wherk it stopped.
Press “EJECT” to eject the disc or
stop the disc
arid
switch to radio.
“EJECT” wili work with the ignition
or radio
off.
Press “EJECT” to load a
disc when the audio system is
off.
rheft-Deterrent System
Your auklio system is equipped with the
‘THEFTLOCK” theft-deterrent system.
See “Theft-Deterrent System” at the end
3f
this section.
rheft-Deterrent Feature
rHEFTZOCK is a security feature for the
Zassette tape and compact disc player. It
:an be used or ignored. If ignored, the
System functions normally:
If
it is used,
your system won’t be usable if it’s ever
stolen. When the system is active, the
indicator light will flash while the ignition
is
off.
Setting Your Security Code
The instructions below tell you how to
enter a security code into the system. If
your vehicle loses battery power for any
reason, you must enter the security code
again before the system will turn on.
1.
Write down any number from
000
to
1999
and keep it in a safe place.
2.
Turn the ignition switch to tHk “ACC”
or “Run” position.
3.
T~irn
the audio system
off.
4.
Press and hold pushbuttons
“1”
and
“4”
together until
“---”
shows on the
display.
You
are now ready to enter your security
:ode. Don’t wait more than
15
seconds
between steps.
5.
Press
“MIN”
and
“000”
will appear
on the display.
6.
Press “MIN’ again and hold until the
last two digits of your code appear.
Release the button.
7.
Press
“HR’
until the first one or two
digits of your code appears.
on tine display.
verification.
8.
Press
“A”.”
“rEP” will appear
9.
Repeat steps
5
through
7
for
10.
Press
“A”.”
“SEC” will appear
on the display. This means that your
audio system is secured.
.
.
.I20

Related product manuals