6.
Connect the red positive
(+)
cable to
the positive
(+)
terminal
of
the vehicle
with
the dead battery. Use a remote
positive
(+)
terminal if the vehicle
has one.
I‘
7.
Don’t let the other end touch metal.
Connect it to the positive
(+)
terminal
of
the
good battery. Use a remote
positive
(+)
terminal if the vehicle
has one. But don’t use the junction
block on your Pontiac.
8.
Now
connect the black negative
(-)
cable to the good battery’s negative
(-)
terminal.
Don’t let the other end touch anything
until the next step. The other end
of
the negative cable doesn’t go tathe
dead battery. It goes to a heavy
’
unpainted metal part
on
the engine
of the vehicle with the dead battery.
155
...
To Next Page
Loading...
