Problems
on
the
Road
How
to
Add
Coolant to the Coolant
Recovery
Tank
If
you haven’t found a problem yet, but
the coolant level isn’t at or above the
“FULL
COLD’ mark, add a
50/50
mixture of clean water (preferably
distilled) and a proper antifreeze at the
coolant recovery tank. (See “Engine
Coolant” in the Index for more
information about the proper coolant
mix.)
NOTICE:
I
In cold weather, water can freeze
and crack the engine, radiator,
heater core and other parts. Use the
recommended coolant.
When the coolant
in
the coolant recovery
tank is at or above the “FULL COLD’
mark, start your vehicle.
If the overheat warning continues, there’s
one more thing
you
can try. You can add
the proper coolant mix directly to the
radiator, but be sure the cooling system is
cool before
you
do it.
. .
,164
To Next Page
Loading...
