4.
Fill with the proper
mix.
Add
coolant
until you see a steady stream of
coolant coming from the bleed valves.
5.
Close
the bleed valves.
i.
Continue to
fill
the radiator up to the
*
base of the filler neck.
’.
Rinse or wipe the spilled coolant from
the engine and compartment.
I.
Start
the engine
and
allow it to run in
idle
for
approximately four minutes.
By
this time, the coolant level inside
the radiator will be lower. Add more
of the proper mix through the filler
neck until the level reaches the bdse
of
the filler neck.
169
...