d
HEATER:
This setting directs most
of
the
air
through the heater ducts and some
of
the
air
through the
windshield defroster vents.
z2
BLEND:
Air is directed through the windshield
defroster vents and the heater ducts.
9
DEFROST:
This setting directs most of the air
through the windshield defkoster vents and some of the
air
through the heater ducts.
Heating
The heater works best if you keep your windows closed
while using it.
1.
Turn the
air
control knob to HEATER.
2.
Turn the fan control knob to the desired speed.
3.
Turn the temperature control knob to a comfortable
During initial start-up only, if your vehicle is equipped
with an optional engine coolant heater, you can use it in
cold weather (around
+20
O
F/-8
O
C
or lower) to improve
heater performance on
start
up. Because an engine
coolant heater warms the engine coolant, your vehicle’s
setting.
heating system can more efficiently provide heat for the
passenger area of
your
vehicle. See “Engine Coolant
Heater” in the Index.
Bi-Level Heating
You may want to use bi-level heating on cool, but
sunny
days. This setting directs cool air toward your body and
warmer air toward your feet.
1.
Turn the air control knob to
BI-LEVEL.
2.
Turn the temperature control knob to
a
comfortable
3.
Turn
the fan control knob to the desired speed.
Ventilation
For mild outside temperatures when little heating or
cooling
is
needed, you can still direct outside air through
your vehicle.
1.
Turn the
air
control knob to
VENT.
2.
Turn the temperature control knob to a comfortable
3.
Turn the fan control knob to the desired speed.
setting.
setting.
3-2
To Next Page
Loading...
