If
the belt stops before
it
reaches the buckle, tilt the latch
plate and keep pulling until you can buckle the belt.
Pull up on the latch plate to make sure it is secure.
If
the
belt isn’t long enough, see “Safety Belt Extender” at the
end
of
this section.
Make sure the release button on the buckle is positioned
so
you
would
be
able
to
unbuckle the safety belt quickly
if you ever had to.
5.
To
make the lap part tight, pull
down
on
the buckle
end
of
the belt
as
you
pull up
on
the shoulder belt.
1-13
To Next Page
Loading...
