Wiper
Blade
Element
Replacement
To
replace
the
wiper blade element refer to the wiper
blade assembly replacement instructions.
To
replace the
element follow these steps:
1.
2.
3.
4.
Locate the
heel end
of
the
wiper blade assembly that
has the two notches held by the wiper blade claw.
Hold the wiper blade assembly with one hand and
pull
the
element gently with the other hand.
(Replacement blade elements have three plastic caps
which retain two metal flexor
strips.
Do
not remove
these caps before the element is installed.)
At
the heel end
of
the blade assembly, notched end
of
blade element last, slide the blade element into the
blade
claw
sets.
The
plastic retainer caps will be
forced
off
as the element is
fully
inserted. Make sure
that
all
the
claw sets are properly engaged
in
the
slots
of
the blade element.
Install wiper blade assembly on wiper
arm.
For
information on windshield wiper blade replacement
type
and
length, see “Capacities and Specifications”
in
the Index.
To Next Page
Loading...
