Unlocking
the Theft-Deterrent Feature After
a
Power
Loss
Enter
your
secret
code
as
follows; pause no more than
15
seconds between steps:
1.
2.
3.
4,
5.
LOC
appears when the ignition is on.
Press MIN and
000
will appear can
the
display.
Press MIN again to make the last two digits agree
with your code.
Press
HR
to make the first one or two digits agree
with
your
code.
Press
AM-FM
after you have confirmed that
the
code matches
the
secret code you have written down.
The display will show
SEC,
indicating the radio is
now operable and secure.
If
you enter
the
wrong code eight times,
INOP
will appear
on the display. You will have to wait
an
hour with
the
ignition on before
you
can
try
again. When
you
try
again,
you will
only
have
three
more chances (eight tries per
chance)
to
enter
the
correct
code
before INOP
appears.
If
you lose or forget your code, contact your dealer.
Disabling the Theft-Deterrent Feature
Enter your secret code
as
follows;
pause
no more than
15
seconds between steps:
1.
2.
3.
4.
5.
6.
7.
Turn the ignition to
ACCESSORY
or
RUN.
Turn the radio
off.
Press
the 1 and
4
buttons together.
Hold
them down
until
SEC
shows on the display.
Press MIN and
000
will appear on the display.
Press MIN again to make the last two digits agree
with your code.
Press
HR
to
make the first one or two digits agree
with your code.
Press
AM-FM
after
you
have confirmed that the
code matches
the
secret code you have written down.
The display will show
---,
indicating that the radio
is
no
longer secured.
If
the code entered
is
incorrect,
SEC
will appear on
the
display. The ra’dio will remain secured until the correct
code
is
entered.
When battery power is removed and later applied
to
a
secured radio, the radio won’t turn
on
and
LOC
will
appear on
the
display.
To unlock
a
secured radio, see “Unlocking the
Theft-Deterrent Feature After a Power
Loss”
earlier in
this section.
To Next Page
Loading...
