A. Stop/Taillamps
B. Back-up Lamps
4. Unscrew the bulb socket from the lamp assembly
by pressing the tab while turning the bulb socket
counterclockwise.
5. Replace the bulb by pulling the old one out and
gently pushing the new one into the bulb socket.
6. Line up the tabs on the bulb socket with the gaps in
the socket holes and screw the bulb socket back
into the lamp housing. You will hear a click.
7. Reinstall by aligning the pins on the back of the
lamp with the sockets on the outboard side of the
lamp opening.
8. Push forward until the pins snap into the socket.
9. Reinstall the screws removed in Step 2.
Replacement Bulbs
Exterior Lamp Bulb Number
Back-up Lamps (Bottom) 3155K
Front Turn Signal/
Parking/
Sidemarker Lamps
3057
Headlamps
High-beam 9005
Low-beam 9006
Stop/Taillamps (Top) 3057K
For replacement bulbs not listed here, contact
your dealer.
5-50
To Next Page
Loading...
