{CAUTION:
If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it
is locked.
To return the seat to the original position after it has
been moved forward, do the following:
1. Make sure there are no objects in front of or behind
the seat.
2. Tilt the seatback
rearward until
the seatback
latches upright.
3. Press and hold the
button under the front
seat lever to return
the seat to its original
position. The seat
will pause for
two seconds when
it reaches its
original position.
The seatback must first be returned upright before
pressing the button, otherwise it will not pause for
two seconds at the original position, and instead will
continue rearward until the button is released.
When rear seat passengers are entering or exiting the
vehicle, it may be helpful to move the seat belt
anchor arm toward the rear of the vehicle.
1-5
To Next Page
Loading...
