Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
A. Stoplamp/Taillamp
B. Back-up Lamp
C. Turn Signal Lamp
To replace one of these bulbs, do the following:
1. Open the trunk. See
Trunk on page 2-9
for more
information.
2. Remove the two screws that attach the taillamp
assembly to the vehicle.
3. Pull the assembly sideways out from the panel so
that the locating pegs on the side of the lamp
assembly snap free from the clips.
5-48
2006 - Pontiac GTO Owner Manual
To Next Page
Loading...
