Headlamps
The lever on the left side of the steering column
operates the exterior lamps.
The exterior lamp switch has the following four
positions:
2(Headlamps): Turn the switch to this position
to turn on the headlamps, parking lamps, and
taillamps.
;(Parking Lamps): Turn the switch to this
position to turn on the parking lamps and
taillamps only.
AUTO (Automatic Headlamp System): Turn the
switch to this position to automatically turn on the
Daytime Running Lamps (DRL) during daytime, and
the headlamps, parking lamps, and taillamps at
night. This position must be selected in order for the
Wiper Activated Headlamps to be activated. See
Wiper Activated Headlamps on page 147.
P(Off/On): This position is the momentary
Off/On switch for the Automatic Headlamp System.
For vehicles first sold in Canada, the transaxle
must be in the PARK (P) position, before the
Automatic Headlamp System can be turned off.
When operating in AUTO, a momentary turn of the
switch to off/on will turn off the Automatic Headlamp
System. Rotating the switch to off/on again will turn
the Automatic Headlamp System back on. The
Automatic Headlamp System is always turned
on at the beginning of an ignition cycle.
146
To Next Page
Loading...
