Pontiac firebird 1968 - Sun Gear Shaft

TURBO HYDRA-MATIC TRANSMISSION
7E-49
Fig. 7E-129 Installing Output Shaft
a. Install large race, center flange up over
sun gear shaft.
b. Install thrust bearing against race.
c. Install second race, center flange up (Fig.
7E-132).
Fig. 7E-130 Installing Front Internal Gear
Ring to Output Carrier
Fig. 7E-131 Installing Reaction Carrier
16. Install rollers that may have come out of the
roller cage by compressing the energizing spring
with forefinger and inserting roller from the outer
side (Fig. 7E-134).
SUN GEAR
/ SHAFT
• • /
I.D. FLANGED
*"* RACE
THRUST .: ,
BEARING ' ;>f;^v
...» |**r.|p FLANGED
j " RACE
Fig. 7E-132 Installing Center Support to Sun
Gear Thrust Bearing and Races