15-12
1968
PONTIAC
SERVICE
MAN
WIRE
HARNESS
FROM
TACH
NEGATIVE
(-)
TERM.
INSTALLATION
OTHERWISE
ON
COIL
SAME
AS
TEMPEST.
SEE
FIG.
15-20
Fig.
15-19
Hood
Mounted
Tachometer—Pontiac
HOOD
MOUNTED
TACHOMETER
Refer
to Figs. 15-19, 20, and 21 for
installation.
NOTE:
It is important
that
rivets are used to re-
install unit to hood. If screws are substituted here,
the anti-theft feature of this tachometer will be
destroyed.
INSTRUMENT
PANEL
TACHOMETER
Refer
to Fig. 15-22 for
installation
of gauge
unit.
Reset Tachometer Needle—Tempest LP.
Mounted
Unit
If
it becomes necessary to reset the tachometer,
a precision tachometer must be hooked up to
work
in
conjunction
with
assembly in car.
1.
Remove cluster and bezel assembly as
outlined
ibove,
but do not disconnect leads.
Fig.
15-20
Hood
Mounted
Tachometer—Tempest