Finding a Station
BAND: Press to choose between FM1, FM2, AM, or
XM™, if equipped, on the Radio with CD (Base). Press
to choose between FM, AM, XM, if equipped, on the
Radio with CD (MP3) and USB Port, Radio with
CD (MP3), or Radio with Six-Disc CD (MP3).
f (Tune): Turn to select radio stations.
© SEEK: Press to seek or scan stations with a strong
signal in the selected band.
• To seek stations, press and release ©SEEK to go
to the previous station and stay there.
• To scan stations, press and hold ©SEEK for a
few seconds until the radio beeps once. The radio
goes to a station, plays for a few seconds, then goes
to the next station. Press
©SEEK again to stop
scanning.
• To scan preset stations in the selected band, press
and hold
©SEEK for four seconds until a double
beep sounds. The radio goes to a stored preset,
plays for a few seconds, then goes to the next stored
preset. Press
©SEEK again to stop scanning preset
stations.
¨ SEEK: Press to seek or scan stations with a strong
signal in the selected band.
• To seek stations, press and release ¨SEEK to go
to the next station and stay there.
• To scan stations, press and hold ¨SEEK for a
few seconds until the radio beeps once. The
radio goes to a station, plays for a few seconds,
then goes to the next station. Press
¨SEEK again
to stop scanning.
• To scan preset stations in the selected band, press
and hold
¨SEEK for four seconds until a double
beep sounds. The radio goes to a stored preset,
plays for a few seconds, then goes to the next
stored preset. Press
¨SEEK again to stop
scanning preset stations.
4-50
To Next Page
Loading...
