I
!.
The following steps will tell you how to
use the jack and change a tire.
The equipment you'll need is in the
trunk.
1.
Pull the carpeting from the floor
of
2. Turn the center retainer nut
on
the
the trunk.
compact spare tire housing
counterclockwise to remove it, then
lift the tire cover. You will find the
jacking instructions label
on
the
underside
of
the tire cover.
3.
If your vehicle is equipped with a
spare tire housing lid hook, pull the
front
of
the lid up and hook it to the
rear upper edge
of
the trunk.
To Next Page
Loading...
