Pontiac tempest 1968 - Page 100

FRONT SUSPENSION 3-13
2. Remove bushing by arranging tools as shown
in Fig. 3-16.
J 21394-1
J 21474-5
J 21058-8
•I
J 21058-15
Fig. 3-16 Removing Pontiac Lower Control Arm Front
Bushing or Tempest Lower Control Arm Rear Bushing
J 21894-1
J 21058-15 / ^ J 21058-8
J 21474-5 OR J 21894-2 J 9584-8
Fig. 3-17 Installing Pontiac Lower Control Arm Front
Bushing or Tempest Lower Control Arm Rear Bushing
3. To replace bushing in lower control arm, ar-
range tools as shown in Figure 3-17 and press
bushing into arm.
4. Install lower control arm on car as outlined
above.
FRONT BUSHING- TEMPEST, FIREBIRD
REAR BUSHING- PONTIAC
J 21474-6 J 21474-12 J 21474-5 J 21474-4
/
J 21474-8
FIREBIRD
|4
malm-
#y
Fig. 3-18 Removing Lower Control Arm Front Bushing
(Firebird, Tempest) and Rear Bushing (Pontiac)
J 21474-4 J 21474-13 J 21474-12 J 21474-2
POSITION OF
J 21474-13
FOR FIREBIRD
Fig. 3-19 Installing Lower Control Arm Front Bushing
(Firebird, Tempest) and Rear Bushing (Pontiac)
3. To replace bushing in lower control arm ar-
range tools as shown in Fig. 3-19.
4. Install lower control arm on car as outlined
above.
1. Remove lower control arm as outlined above.
2. Remove bushing by arranging tools as shown in
Fig. 3-18.
REAR BUSHING-FIREBIRD
1. Remove control arm as outlined above.