Pool Pro CPPS30 - Page 11

11
6. TIMER SETTING
To adjust the time of the clock, simply hold the outside of the white segments
and turn the dial until the clock reads the right time and the number near the
timer on/off arrow is close to the same number.
Your Timer is simple to use, easy to understand and a reliable well known design.
It has a battery back up function if you operate your pool equipment from a low
tariff supply that turns off at times. It does require at least 12 hours charging at
first but simply leave it alone and it will charge itself as required.
This me is set at 8:00am and the dial pointer shows
the 8:00 posion as does the clock face hands
The Timer comes on where the pins that are pressed
out r
each the White dial pointer (in this case it will
be from 6 – 10am and 4 – 8pm)
When White adjustable segment pins reach this
dial pointer (in AUTOMATIC posion)
the Power Pack turns: ON if pins pressed out
OFF
if pins pulled in
With White Lever in this posion power pack is ON
With White Lever in this posion Power Pack is in
AUTOMATIC and the mer seng turns it ON/OFF
With White Lever in this posion Power Pack is OFF