PoolLab 1.0 User Manual

GB
F
E
D
I
GB
F
E
D
I
GB
F
E
D
I
User Manual
Manuel d’utilisation
Manual de usuario
Gebrauchsanleitung
Manuale dell’utente
V29
Användarhandbok
Käyttäjän käsikirja
User Manual
®
Brukermanual
Brugervejledning
NEW: Quick Start
Guide included!
NYHED: Der medfølger en hurtig startvejledning! (S.14) |
NYHET: Snabbstartguide ingår! (S.14) | NYHET: Inkluderer
hurtigstartguide! (s.14) | UUTUUS: Pika-aloitusopas
mukana! (S.14)

PoolLab 1.0 Specifications

General

Measurement Method	Photometric
Display	LCD
Waterproof	IP68
Bluetooth	Yes
Parameters Measured	pH, Free Chlorine, Total Chlorine, Bromine, Alkalinity, Cyanuric Acid, Calcium Hardness
Measurement Range Calcium Hardness	0 - 500 mg/L
Resolution pH	0.1
Resolution Free Chlorine	0.1 mg/L
Resolution Total Chlorine	0.1 mg/L
Resolution Bromine	0.1 mg/L
Resolution Alkalinity	1 mg/L
Resolution Cyanuric Acid	1 mg/L
Resolution Calcium Hardness	1 mg/L
Accuracy pH	±0.1
Accuracy Free Chlorine	±0.1 mg/L
Accuracy Total Chlorine	±0.1 mg/L
Accuracy Bromine	±0.1 mg/L
Accuracy Cyanuric Acid	±10 mg/L
Accuracy Calcium Hardness	±10 mg/L
Type	Photometer
Measurement Range pH	6.5 - 8.4
Measurement Range Free Chlorine	0.0 - 6.0 mg/L
Measurement Range Total Chlorine	0.0 - 6.0 mg/L
Measurement Range Bromine	0.0 - 13.5 mg/L
Measurement Range Alkalinity	0 - 300 mg/L
Measurement Range Cyanuric Acid	0 - 160 mg/L
Operating Temperature	0 - 50 °C

Summary

Getting Started

Package Contents

List of items included in the PoolLab 1.0 package.

Battery Installation and Management

Instructions for managing and replacing device batteries.

Tablet and Liquid Measurement Modes

Explanation of Tablet Mode and Liquid Mode settings.

Quick Start Guide

Step-by-step instructions for initial setup and basic use.

Measurement Fundamentals

Zero Calibration Procedure

Procedure for calibrating the device to zero.

Overrange and Underrange Handling

Procedure for managing overrange or underrange results.

Error Codes and Troubleshooting

Explanation of error codes and solutions to common problems.

Specific Water Parameter Tests

Active Oxygen (MPS) Testing

Procedure for testing Active Oxygen levels using MPS.

Alkalinity Testing

Procedure for testing water alkalinity.

Bromine Testing

Procedure for testing bromine levels in water.

Calcium Hardness Testing

Procedure for testing total hardness of water.

Chlorine Testing

Procedure for testing chlorine levels in water.

pH Testing

Procedure for testing water pH levels.

Total Hardness Testing

Procedure for testing total hardness of water.

Urea Testing

Procedure for testing urea levels.

Device Maintenance and Compliance

Cuvette Replacement

Step-by-step guide for replacing the device's cuvette.

Accessories and Reagents Catalog

List of available accessories, reagents, and spare parts.

Technical Specifications

Details on LED, battery, operating temperature, and IP rating.

Measurement Tolerances

Accuracy tolerances for various measured parameters.

Compliance and Disposal Information

Information on CE, UKCA, FCC/IC compliance and product disposal.