EasyManua.ls Logo

Pop-A-Shot DUAL SHOT - User Manual

Pop-A-Shot DUAL SHOT
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DUAL SHOT | SPORT
OWNERS MANUAL
SKU#PASDSS19-02 WWW.POP-A-SHOT.NET
Question and Answer IconNeed help?

Do you have a question about the Pop-A-Shot DUAL SHOT and is the answer not in the manual?

Summary

Important Safety Instructions

General Safety Instructions

Read all safety and operating instructions before use; check for damage. Not a toy; for adult supervision; potential fire/electrical shock risks.

Assembly Preparation

Verify parts list, find a clean level space, and consider getting help from a friend.

Required Tools

Phillips Head Screwdriver, Flat Head Screwdriver, Allen Wrench, and Wrench are needed.

Before Getting Started Notes

Visit support page for hints; contact email provided for issues.

Assembly Steps

Step 1: Base Tube Assembly

Attach Base Tubes with Connector Tube using bolts, washers, and nuts.

Step 2: Vertical Tube Assembly

Insert Vertical Tubes into Base Tubes and add Elbow Tubes.

Step 3: Vertical Tube & Connector Assembly

Attach Base Tubes and Vertical Tubes with Connector Tube using bolts and nuts.

Step 4: Extension Tube Assembly

Attach Extension Tubes to Base Tubes using bolts, washers, and nuts.

Step 5: Diagonal Tube Assembly

Telescope Diagonal Tubes and attach them to Vertical and Forward Tubes.

Step 6: Front Tube & Bottom Tube Assembly

Attach Front Tubes to Extension Tubes and Bottom Tube to Front Tubes.

Step 7: Lean Bar Assembly

Attach the Lean Bar to the top of the Front Tubes.

Step 8: Scoreboard Attachment

Attach the Scoreboard to the rear of the Backboard using bolts.

Step 9: Rim and Backplate Assembly

Attach Rims to the Backboard and Backplates using bolts, washers, and nuts.

Step 10: Paddle and Net Attachment

Attach Paddles to the Backboard and Nets to the Rims.

Step 11: Backboard Mounting

Attach the Backboard to the top of the Vertical Tubes using bolts.

Step 12: Back Tube Installation

Attach Back Tubes to both Vertical Tubes using medium bolts.

Step 13: Ramp and Forward Tube Installation

Feed Ball Return Ramp over Top Elbow Tube and Forward Tube, align with Lean Bar.

Step 14: Ball Return Ramp Securing

Secure Ball Return Ramp to Back Tube and scoreboard, then tighten front velcro straps.

Step 15: Control Panel Installation

Snap Control Panel onto Lean Bar, connect wires, plug in AC Adapter, and optionally use batteries.

Game Operation

Control Panel Operation

Instructions for turning the game on/off, selecting games, audio, and volume.

Audio Options

Details on the 6 available audio selections, from music to no sound.

Game Options

Standard Game

2 Players, 30 seconds, with bonus points and basket scoring rules.

Solo Game

1 Player, 30 seconds, with one basket active and scoring rules.

Crisscross Game

2 Players, 30 seconds, shooting at opponent's basket with scoring rules.

Skeet Shooting

1 or 2 Players, with announcer prompts and a 3-second shot window.

Sharp Shooter

1 Player, with announcer directing shots to specific baskets within 3 seconds.

Climbing the Ladder

2 Players, 30 seconds, with escalating point values for consecutive baskets.

Overtime Game

2 Players, 1 minute, with specific scoring rules for the final 10 seconds.

Sudden Death Game

2 Players, 15 seconds, with scoring rules for the final 10 seconds.

Free Play Game

1-2 Players, no clock, where all baskets count 2 points.

Team Game

2 Players, 30 seconds, with dual score display and bonus rules.

Pop-A-Shot DUAL SHOT Specifications

General IconGeneral
Balls Included7
Basketball SizeMini
Assembly RequiredYes
MaterialNylon
DisplayLED
AudioYes
BatteriesNot included
Included ComponentsBalls, Net

Related product manuals