11
1235 MAINTENANCE CHECK LIST
1. Check key switch, electrical connections for proper operation, tightness and integrity.
2. Operate unit, check operation, up cycle, and down cycle.
3. Check hydraulic system for leaks, check hoses, cylinders, seals, and motor. Check level of hydraulic fluid. (Use hydraulic fluid,
available at most auto part stores, if necessary). CAUTION - Do not overfill.
4. Check structural integrity, look for broken welds or bent metal parts or fittings. Check casters.
5. Inspect rubber pad on bottom of backstop base, backboard pad and padding on unit.
6. Inspect safety/adjustment “T” handle and brace tube for metal fatigue. IMPORTANT – T-handle and threads must be lubricated
with grease at all times.
7. Inspect floor attachment system including floor anchors, move unit onto playing floor, check attachments. With unit in playing
position check backboard for level and plumb, goal for level 90° from face of goal and at parallel position. Check distance from
free throw line to face of backboard.
Make corrections to units as needed. Repair or replace components as necessary.
If it is necessary to add hydraulic fluid, use an anti-wear fluid with a
viscosity grade of VG46. Use of one of the following is recommended:
Amoco AW 46
Chevron HYD 46
Mobil DTE 25
Or An Equivalent
To Next Page
Loading...