EasyManua.ls Logo

Portway Luxima User Manual

Portway Luxima
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Luxima
Gas Stove
LOG EFFECT HEATING STOVE
Installation, Maintenance & User Instructions
Hand these instructions to the user
Model No. PLGS**RN is for use on Natural Gas (G20) at a supply pressure of
20 mbar in G.B. / I.E.
** denotes cosmetic variance

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Portway Luxima and is the answer not in the manual?

Portway Luxima Specifications

General IconGeneral
BrandPortway
ModelLuxima
CategoryStove
LanguageEnglish

Summary

Information and Requirements

Appliance Information

Details about the stove's specifications, including pilot type and weight.

Efficiency Declaration

Details the appliance's efficiency measured according to BS EN 613:2001.

Conditions of Installation

Specifies legal requirements and standards for gas appliance installation.

Flue and Chimney Suitability

Defines minimum dimensions and requirements for flues and chimneys.

Ventilation Requirements

Outlines ventilation needs for the stove based on input and location.

Clearances to Surfaces

Specifies minimum distances from the stove to surrounding materials.

Flue and Chimney Inspection

Details the checks required for the flue or chimney before installation.

Hearths Requirements

Specifies minimum thickness and placement requirements for the hearth.

Spillage Monitoring System

Explains the function and warnings related to the spillage sensing thermal switch.

Pre-Cast Flue Installations

Instructions for installing the stove into pre-cast flue systems.

Installation of Fire

Unpacking the Stove

Guide on carefully removing the stove and checking contents.

Installing the Stove

Details methods for connecting the stove to various flue systems.

Top Flue Outlet with Integral Clay Liner

Instructions for connecting the stove's top flue outlet to an integral clay liner.

Rear Flue Outlet without Clay Liner

Steps for fitting the stove's rear flue outlet to a chimney without a liner.

Top Flue Outlet without Clay Liner

Guide for connecting the top flue outlet to a chimney lacking an integral liner.

Pre-fabricated Flue System Installation

Instructions for connecting the stove to a pre-fabricated flue system.

Changing Flue Outlet (Top to Rear)

Procedure for reconfiguring the flue outlet from the top to the rear position.

Flue Restrictor Baffle

Instructions for removing and refitting the flue restrictor baffle.

Gas Connection and Pressure Testing

Detailed steps for making the gas connection and performing pressure tests.

Fitting the Batteries

Guide on how to connect the battery pack and insert batteries into the handset.

Fuel Bed Assembly and Commissioning

Assembling the Log Fuel Bed

Step-by-step instructions for placing the ceramic logs and vermiculite.

Manual Stove Lighting

Procedure for operating the stove using the emergency on/off switch.

Remote Handset: Time, Date & Temperature Settings

Guide to setting the time, date, and temperature on the remote control.

Remote Control Stove Lighting

Instructions for starting the stove using the remote control handset.

Remote Control: Advanced Settings

Overview of advanced settings available on the remote control.

Snooze Mode Operation

How to set the snooze mode to automatically turn off the fire.

Thermostatic Mode

Instructions for using the thermostatic mode for room temperature regulation.

Checking Combustion Product Clearance

Procedure for testing flue performance and clearance of combustion products.

Maintenance

Servicing Notes

Guidelines for annual servicing by a qualified Gas Safe registered engineer.

Removing the Burner Assembly

Steps for safely removing the burner assembly for access or servicing.

Replacing the Valve Assembly

Instructions for removing and replacing the gas control valve assembly.

Replacing the Pilot Assembly

Guidance on removing and replacing the pilot assembly, including thermocouple.

Replacing the Thermal Cut-Out

Steps for removing and replacing the thermal cut-out device.

Parts Shortlist

List of common user-replaceable parts with part numbers.

User Instructions

Installation Information

Summary of installation conditions and safety notes for the user.

About Your Stove

Overview of the Portway gas stove's features and fuel bed design.

Important Safety Information

Key safety warnings, including fireguard use and annual servicing.

Operating Stove (Remote Control)

Instructions for operating the stove using the remote control handset.

Manual Stove Operation

How to operate the stove manually using the emergency on/off switch.

Replacing Batteries

Procedure for replacing the batteries in the remote handset and stove.

Remote Handset: Time, Date & Temperature Settings

Guide to setting the time, date, and temperature on the remote control.

Remote Control: Advanced Settings

Overview of advanced settings available on the remote control.

Snooze Mode Operation

How to set the snooze mode to automatically turn off the fire.

Thermostatic Mode

Instructions for using the thermostatic mode for room temperature regulation.

Turning Off with Handset Malfunction

Procedure for turning off the stove if the remote handset fails.

Assembling the Log Fuel Bed

Step-by-step instructions for placing the ceramic logs and vermiculite.

User Replaceable Parts

List of parts that can be replaced by the user, with part numbers.

Related product manuals