EasyManua.ls Logo

Posi-Plus Line Runner 700-40 User Manual

Posi-Plus Line Runner 700-40
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
700-OPEA-004
OPERATOR'S MANUAL
TELESCOPIC AERIAL DEVICE
Line Runner 700-40
Posi-Plus Technologies Inc. Copyright © 2018
COPYRIGHT-WARNING
ANY REPRODUCTION OR DISTRIBUTION OF THIS WORK, IN WHOLE OR IN PART, BY ANY MEANS
WHATSOEVER, IS STRICTLY PROHIBITED WITHOUT THE EXPRESS WRITTEN CONSENT OF POSI-
PLUS TECHNOLOGIES INC.
Question and Answer IconNeed help?

Do you have a question about the Posi-Plus Line Runner 700-40 and is the answer not in the manual?

Posi-Plus Line Runner 700-40 Specifications

General IconGeneral
BrandPosi-Plus
ModelLine Runner 700-40
CategoryLifting Systems
LanguageEnglish

Summary

Preface and Safety Warning

Electrocution Hazard

Warns about the non-insulating nature and the need for safe clearances.

Unit Specifications

About This Manual

Provides instructions for operation, understanding capabilities, safety, setup.

General Specifications

Details boom movement, rotation, controls, and operational limits.

Standard Optional Features

Lists optional features like remote controls and emergency systems.

Component Identification

Safety

Accident Prevention Signs

Discusses the importance and availability of accident prevention signs.

Safety Instruction Symbols

Explains the use of "Danger", "Warning", and "Caution" symbols and terms.

Safety Information

General Safety Guidelines

Covers compliance, training, modifications, operator responsibility, and operating limits.

Pre-Operation Safety Checks

Lists critical checks and precautions before operating the unit.

Operational Safety

Specific Safety Hazards

Electrical and Communication Dangers

Details dangers of electrocution, communication failure, and platform door security.

Safety Decals

Decal Listing and Location

Explains where to find and how to replace safety decals.

Before Operation

Capacity and Stability

Explains platform capacity, stability factors, and stabilization methods.

Operation Near Energized Conductors

Daily Pre-Operation Checks

System and Component Inspection

Lists essential daily inspections for hydraulic, electrical, and mechanical systems.

Control and Safety Device Testing

Preparing for Operation

Operating Instructions

Controls

Cab Controls

Describes controls located inside the vehicle cab.

Intercom System

Explains the function and operation of the intercom system.

Upgraded Intercom System (Optional)

Lower Controls

Upper Controls

Upper Control Functions

Joystick Operation

Explains the one-hand joystick control for aerial device movement.

Emergency Stop and Pump

Details how to activate emergency stop and use the emergency pump.

Platform Tilt Adjustment

Describes the platform tilt control for leveling and positioning.

Operation

Boom Functions

General description of boom articulation, extension, retraction, and rotation.

Personnel Platform

Fall Protection Attachment

Details the fall protection attachment point (D-ring).

Platform Leveling System

Lower Boom Lifting Eye

120V AC Power Source (Option)

Protection Systems

System Limitations and Types

Discusses system limitations, boom stow, and side load protection.

Emergency Operation

Safe Lowering Procedures

Guidelines for safe emergency lowering of the platform.

Emergency Lowering DC Pump

Explains the function and use of the DC pump for lowering.

Troubleshooting

Common Issues and Solutions

Summarizes common symptoms, causes, and corrective actions.

Care of the Unit

Hydraulic System Maintenance

Guidelines for maintaining hydraulic oil quality, level, and temperature.

Structures and Mechanical Systems