Positive Grid Spark LIVE - Device Card and Settings; Accessing and Adjusting Device Settings

]k
6=+(L+;:&+(/-"$(&-0([+(-&&+99+$(:0('=+(C+0%(*-@+(#0&+(7#%U;+(&#00+&'+$(7#%"()*-"D(J8*f(T0&+(:'U9(
&#00+&'+$Z('-*(#0('=+($+;:&+(-'('=+('#*(#M('=+(8+0%('#(-&&+99(7#%"(L+;:&+(/-"$Z(.=+"+(9+;+"-1(9+'':0@9(&-0(
[+(-$R%9'+$(-0$(9'-'%9+9(&-0([+(#[9+";+$f(
Yf Tone Control and Bluetooth Audio(B()=#.9('=+(9'-'%9(#M(7#%"(<1%+'##'=(&#00+&':#09([+'.++0(7#%"(
$+;:&+('#('=+()*-"D(J8*(
\f Power Settings(B(!#.+"()+'':0@9(.:11(-11#.(7#%('#(-$R%9'()*-"D(EFGHU9(J%'#()'-0$[7(-0$(J%'#()=%'$#.0(
M+-'%"+9('#(9-;+([-''+"7(1:M+f(
Spark LIVE will automatically enter a low power state after a set amount of time has passed where no
audio is detected to preserve battery life. The time it takes to enter standby mode can be adjusted in this
menu. While the Spark LIVE is in this state, instrument output and music playback will be temporarily
disabled. To enable audio output again, play your plugged in instrument or start audio playback to
reactivate it.
]f Battery B(L:9*1-79('=+([-''+"7(9'-'%9(#M(7#%"($+;:&+f(
^f Name(B(/=-0@+('=+($:9*1-7(0-8+(#M(7#%"()*-"D(-8*(.=+0(&#00+&':0@('#(7#%"()*-"Df(
_f Model(B(L:9*1-79('=+(8#$+1(#M(7#%"()*-"D(-8*f(
ef Firmware(B(L:9*1-79('=+(Q"8.-"+(;+"9:#0(:09'-11+$(#0(7#%"()*-"D(-8*f(
lf Serial Number(B(L:9*1-79('=+()+":-1(g%8[+"(#M(7#%"()*-"D(-8*f(
bf Restore to Factory Settings(B(5+9'#"+9(-11(9+'':0@9('#('=+(M-&'#"7($+M-%1'9f(
kf Forget This Device(B(5+8#;+('=:9($+;:&+(M"#8(7#%"(1:9'(#M(&#00+&'+$($+;:&+9f(
Device Card and Adjustments