Carefully remove the Opløft from the packaging and place on a suitable desk/table surface.
Technical Data
Operation
TO RAISE
Grip sides and simultaneously
push out both handles.
Slowly lift to raise the surface
and release handles once at
desired height.
TO LOWER
Grip sides and simultaneously
push out both handles. Apply
downward pressure to the
surface and release handles when
you reach the desired height.
TO CLOSE FULLY
At the lowest position while
maintaining a downward force,
release side handles to securely
close. If needed, push down to
the middle of the platform until a
secure click is heard.
To Next Page
Loading...