-------------------------------------------------------------------- PACP-6100 Operator’s Manual 9
Avoid places where the ambient temperature falls below 10℃ or exceeds 40℃ for
normal operation, or below -10℃ or exceeds 40℃ (14℉-104℉) for transportation
and storage. Humidity should be maintained between 30 and 75% for normal
operation, transportation and storage and atmospheric pressure (700~1060hpa).
Avoid environments where the equipment is exposed to excessive shocks or
vibrations.
2.4 Safety Precautions
This equipment has been developed and tested according to national as well as
international safety standards. This guarantees a very high degree of safety for this
device. The correct handling of this equipment is imperative for its safe operation.
Therefore, please read carefully all instructions before switching on this device. For
more detailed information, please contact our Customer Service Department or one of
our authorized representatives.
1. This equipment must not be used (a) in an area that is in danger of
explosions and (b) in the presence of flammable, explosive, or volatile
solvents such as alcohol, benzene or similar chemicals.
2. Do not put or use this device in humid rooms. Humidity should be
maintained between 30 and 75% for normal operation. Do not expose the
device to water splashes, dripping water, or sprayed water. Do not place
containers containing fluids, liquids, or gases on top of any electrical
equipment or devices.
3. The equipment must be operated only by, or under direct supervision of
a properly trained and qualified person.
4. Customer maintenance of this equipment may only be performed as
stated in the User’s Manual. Any additional maintenance may only be
performed by POTEC service technicians or other authorized persons.
To Next Page
Loading...