CHARGING WITH AC ADAPTOR
Plug the AC adaptor cord into the input charging jack on the front of the unit and the adaptor
into any 120 Volt AC wall outlet. The battery status indicator light will illuminate red to
indicate the unit is charging. Charge for 34-36 hours or until battery is full. The battery status
indicator light will illuminate green when the unit is fully charged.
CHARGING WITH DC ADAPTOR
Due to safety circuits built into the input charging jack, DC charging through this location will
not fully charge the battery. Plug input of DC adapter plug into charging port of Jumpstart and
the other end into the cigarette lighter socket of your vehicle.Yellow light on DC adapter outlet
will illuminate to confirm good connection. Full charge will take approximately 12-14 hours.
Vehicle should be running for full charging to take place.
To Next Page
Loading...