To Next PageTo Next Page
Need help?Do you have a question about the Potterton Solar Thermal Domestic Hot Water System Solar and is the answer not in the manual?
General| Brand | Potterton |
|---|---|
| Model | Solar Thermal Domestic Hot Water System Solar |
| Category | Water Heater |
| Language | English |
Instructions for filling the solar primary circuit with heat transfer fluid.
Procedure for flushing the system pipework to remove contaminants before filling.
Steps for filling the solar primary system with heat transfer fluid to achieve correct pressure.
Verifying system pressure and checking for leaks after filling.
Process for bleeding air from the solar primary system using the air separator.
Adjusting the system pressure to the correct operating range.
Procedure for setting the correct flow rate based on collector type and number.
Critical settings requiring installer adjustment for system configuration.
Procedure for checking antifreeze and pH value of the heat transfer fluid.
Identifying system failures based on error messages displayed on the controller.
Temperature-resistance table for checking PT1000 sensor functionality.
