Thank you for your purchase
stores | catalog | www.potterybarn.com
Page 2 of 2
Important Safety Instructions:
• Please read all instructions carefully before assembling.
• For your safety, assembly by two or more adults is strongly recommended.
• Keep instructions for future use.
• Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
integrity of the item.
Parts Included Box.1:
• (1) Headboard (A)
• (1) Footboard (B)
A
D
B C
E
To Assemble Bed:
1. Attach the side rails (C) to headboard (A) and footboard (B) by inserting hooked end into the corresponding slots.
As shown in fig 1, illustration 1, Ensure connection are secure.
2. Attach legs support (E) to the slat (D) by inserting Allen Bolts (F) through the holes on the slat (D) into the inserts
in the legs supports (E). Tighten with the Allen Key (G) as shown in illustration 2.
A
G
F
D
C B E
3. Lay slats (D) in place over side rails lips and insert the screws (H) into the holes at the end of the slats (D).
Tighten with a screwdriver (Not Included) as shown in fig 2, illustration 3.
4. Levelers on bottom of support legs (E) can be adjusted for uneven floors by turning until contact is made with
floor as shown in illustration 4.
D
E
5. Tighten all connections.
Care Instructions:
• Dust often using a clean, soft, dry and lint-free cloth.
• Blot spills immediately and wipe with a clean, damp, cloth.
• We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
To Previous Page
Loading...
