To Next PageTo Next Page
Need help?Do you have a question about the Pottinger NOVADISC 400 and is the answer not in the manual?
General| Brand | Pottinger |
|---|---|
| Model | NOVADISC 400 |
| Category | Lawn Mower |
| Language | English |
Welcomes the user and congratulates them on their choice of Pöttinger.
Outlines the manufacturer's and dealer's obligations regarding product liability.
Lists items to be checked during product delivery and handover.
Explains the CE sign and its meaning regarding EU guidelines.
Details the meaning of various safety symbols and their implications.
Highlights points referring to safety indicated by a specific sign.
Step-by-step guide for attaching the implement to the tractor's three-point linkage.
Instructions for connecting hydraulic lines and securing the implement.
Step-by-step guide for safely detaching the implement from the tractor.
Guidance on how to park the implement and prepare it for storage.
Procedures for moving the implement from working to transport mode.
Describes the initial state of the implement when attached to the tractor.
Advice on complying with country-specific regulations for road travel.
Information on optional lighting units for road use.
Steps to set up the implement for mowing operations.
Detailed instructions for lowering the cutter bar into its working position.
Essential checks and safety precautions before starting the mower.
Guidance on safe turning practices while mowing.
Critical safety advice and risks associated with operating on inclines.
Procedures and general rules for effective mowing.
Explanation of the safety mechanism designed to prevent damage from obstacles.
Instructions on installing additional equipment like swathformers.
Details on using the swath disc to form a narrower swath.
Information on optional conveyor drums for creating narrower swaths.
Recommendations for using flat cone conveyors to improve swath deposit rates.
Basic safety rules and general tips for maintaining the machine.
Procedures for cleaning machine parts and preparing for parking or winter.
Notes on maintenance for drive shafts.
Checks and maintenance for the hydraulic system.
Procedure for checking and replenishing oil in the angular gearbox.
Steps for draining and refilling the angular gearbox oil.
How to check and maintain the oil level in the cutter bar.
Instructions for changing the oil in the cutter bar.
Guidance on correctly installing new cutter blades.
How to check and adjust the tension of the V-belts.
Procedures to check mowing blade holders for wear and damage.
Information on the system for fast cutter blade replacement.
How to inspect the mowing blade suspension for wear and damage.
Detailed steps for changing cutter blades on newer models.
Instructions on where and how to store the cutter blade lever.
Overview of machine specifications, optional equipment, and connections.
Information on the vehicle identification plate and the intended use of the mower.
Comprehensive safety advice covering defined use, spare parts, and protection devices.
Safety rules for transport, driving, and general operation.
Guide to determining length and preparing the driveshaft for tractor use.
Safety rules and operating procedures for driveshafts.
Lubrication and wear checks for driveshafts.
Explanation of the cam type cut-out safety clutch and friction clutch checks.
Table detailing lubrication points, frequency, and lubricant types.
Guide to choosing the correct lubricants based on type and specifications.
Instructions for adjusting the implement's position based on tractor width.
Step-by-step guide for repairs on the cutter bar assembly.
Guidelines for calculating implement weight, axle loads, and ballasting.
Advice on rear-mounted implements and front/rear combinations.
How to calculate the real front axle load and compare it to permissible limits.
Calculating total weight and rear axle load for safe operation.
Understanding permissible tyre load carrying capacity.
