POWER Bear HSM V-Press 1160 plus

To Next Page

Important Information

HSM V-Press 1160 plus

Vertical baling press

Model: HSM V-Press 1160 plus

Sliding door with hand wheel door lock

incl. operating manual / declaration of conformity

Pressing power in kN 548

Motor in kW 4

Voltage / Frequency 3 x 400 V / 50 Hz

Loading aperture W x H in mm 1195 x 650

Bale weight in kg (depending on material) up to 550

Bale size L x W x H in mm 1200 x 1100 x max. 1200

Hourly output in bales 1-2

Cycle time in idle operation (theor.) in sec. 25

Acoustic level in dB(A) 62.9

Press chamber size W x D x H in mm 1195 x 1100 x 1640

Dimensions of machine* W x D x H in mm 1780 x 1568 x 2985

Transport dimensions of machine W x D x H in mm 1780 x 1568 x 2140

Machine weight in kg 2427

Strapping 4-fold with wire / optional polyester tape

x Rapid stroke technolgy saves time and money

x High capacity press chamber means optimum ﬁlling

eciency

x Low-maintenance, sturdy hydraulics and hard-chromed

pistons ensure long service life

x Highly compressed bales which can already be marketed

without requiring any further pressing

x High process reliability due to HSM TCS

(TorsionControlSystem)

x Basic equipment: 2 coils wire 2.8 x 4400 mm

*External dimensions of the machine when set up for operation.

All technical data and dimensions are approximate values. Technical and design modifications reserved.

Need help?

Do you have a question about the POWER Bear HSM V-Press 1160 plus and is the answer not in the manual?

The HSM V-Press 1160 plus is a vertical baling press designed for efficient and reliable compaction of various materials. This model is equipped with a sliding door featuring a hand wheel door lock, ensuring secure operation. The device comes with an operating manual and a declaration of conformity, providing users with comprehensive instructions and compliance information.

Function Description:

The primary function of the HSM V-Press 1160 plus is to compress recyclable materials into highly dense bales, which can then be easily stored, transported, and marketed without further processing. The press utilizes "Rapid stroke technology," which significantly reduces cycle times, thereby saving time and increasing operational efficiency. Its high-capacity press chamber allows for optimal filling, maximizing the amount of material processed in each cycle. The machine is built with low-maintenance, sturdy hydraulics and hard-chromed pistons, ensuring a long service life and consistent performance. A key feature is the HSM TCS (TorsionControlSystem), which enhances process reliability by monitoring and controlling the pressing process, preventing imbalances, and ensuring uniform bale quality. The press is designed to produce highly compressed bales that are ready for immediate marketing.

Important Technical Specifications:

Pressing power: 548 kN
Motor: 4 kW
Voltage / Frequency: 3 x 400 V / 50 Hz
Loading aperture (W x H): 1195 x 650 mm
Bale weight: Up to 550 kg (depending on material)
Bale size (L x W x H): 1200 x 1100 x max. 1200 mm
Hourly output: 1-2 bales
Cycle time in idle operation (theoretical): 25 seconds
Acoustic level: 62.9 dB(A)
Press chamber size (W x D x H): 1195 x 1100 x 1640 mm
Dimensions of machine (W x D x H): 1780 x 1568 x 2985 mm (when set up for operation)
Transport dimensions of machine (W x D x H): 1780 x 1568 x 2140 mm
Machine weight: 2427 kg
Strapping: 4-fold with wire / optional polyester tape
Electrical connection:
- Rated power: 4.0 kW
- Operating voltage U: 400 V
- Frequency: 50 Hz
- Rated current In: 8.5 A
- Battery backup: 3 x 16 A (K-, C-, gL-characterise)
- Connector plug: CEE 5 x 16 A 6 H
- Length of power supply: Approx. 3000 mm

Usage Features:

The HSM V-Press 1160 plus is designed for ease of use and operational efficiency. The "Rapid stroke technology" ensures quick processing, minimizing downtime. The large loading aperture and high-capacity press chamber facilitate efficient material feeding. The sliding door with a hand wheel lock provides a secure and user-friendly mechanism for accessing the press chamber. The machine's design prioritizes safety and reliability, with features like the TorsionControlSystem to ensure consistent bale quality and prevent operational issues. The basic equipment includes two coils of wire (2.8 x 4400 mm) for immediate use. For installation, a minimum ceiling height of 3000 mm is required. The machine's footprint, including the swing range of the pressing door, requires an entire depth of 3000 mm. The floor loading capacity must be adequate, with a maximum of 1000 kg per m² to support the machine and bale weight. Minimum door and passage sizes for movement to the installation place are 1620 mm width and 2170 mm height.

Maintenance Features:

The press is built with low-maintenance, sturdy hydraulics and hard-chromed pistons, which contribute to its long service life and reduce the need for frequent maintenance. The robust construction ensures durability even under continuous operation. For strapping, the machine supports 4-fold strapping with wire, and an optional polyester tape can be used with a separate tape station. Consumable materials like strapping wire (order number: 6136 993 002, Ø x L = 2.8 x 4400 mm) and strapping tape WG 55 (order number: 6514 993 000) are readily available. The design allows for straightforward access to components for any necessary servicing or part replacement. The comprehensive operating manual provides detailed instructions for routine maintenance and troubleshooting, empowering users to keep the machine in optimal working condition.