Power Dynamics WS Series - Page 4

4
OVERVIEW
1. Power switch
2. DC Power connector
3. Speaker output connector for passive speaker
4. Infrared receiver and LED indicator
CONNECTION
Connect the DC adapter to the speakers and connect to the 110V~230V AC power. Then you can turn on power switch. The
status indicator LED will be red and fast blinks, after about 10 seconds the speaker will sound a tone, it means the speaker is
ready.
DOWNLOAD AND INSTALL LEGACY PLAYER APP
Download the Legacy Player app via Apple store or Google play.
Apple Store Google Play
Open the Legacy Player app on your smart phone, the APP will automatically search for speakers. And then you can follow the
wizard step by step to complete the speaker settings, check the last page of manual.
Power ON / OFF
Short press for join the speaker group
Long press for exit the speaker group
No function
Volume UP
Volume Down
Previous
Play / Pause
Next
Switch UP for the predefined Channel
Switch Down for the predefined Channel
BT
Short press for switch to the BT play mode
Long press for switch to the BT pair mode
Short press for connect the speaker to the WIFI
Long press for restore to the factory settings
Switch between BT and WIFI