Power Electronics SD700 Series - Page 28

SD700 – TOUCH-GRAPHIC DISPLAY
POWER ELECTRONICS
26
APPLICATION MANAGEMENT
2.4.1. Parameter Setting in case of Numerical Values
The following figure shows an example of full navigation tree (step sequence) in order to adjust a
parameter, the value of which is a numerical value. In the last step, it is shown the configuration
dialogue window for numerical value.
Figure 2.13 Parameter setting in case of numerical value. Navigation tree
The dialogue window shows minimum and maximum allowed values for the parameter and an
edit box with the present value of the parameter. The user can modify the parameter value writing
a new one here. Then, the user should confirm the change by tapping on the ‘OK’ button. On the
other hand, by tapping on ‘X’ button, the changes are discarded.
If the introduced value is incorrect (not between minimum and maximum values), the dialogue
window will be not closed.
2.4.2. Parameter Setting in case of Configuration Options
The following figure shows an example of full navigation tree (step sequence) in order to adjust a
parameter, the value of which is a configuration option. In the last step, it is shown the
configuration dialogue window for configuration options.