POWER ELECTRONICS
SD700 – TOUCH-GRAPHIC DISPLAY
APPLICATION MANAGEMENT
39
2.8. Fault Visualization
When the drive is in normal operation, the drive status field located on the left hand of the title bar
displays the operation status and warnings and its background colour is green. When a fault
occurs, the background colour turns red and the field displays the present status ‘OFF’ and the
fault number in alternative way.
Figure 2.28 Alternation in the visualization of the present fault and OFF status
The user can obtain more information about the present fault status by accessing to the
visualization parameter ‘Present fault’ included in the visualization parameter group ‘V4 Internal
visualization’ from ‘V Visualization’ menu.
Additionally, the user can visualize the fault history of the drive through the configuration
parameter group ‘G13 Fault history’ included in ‘G Configuration group’ menu.
In order to get more detailed information about the fault descriptions and their possible causes
and solutions, refer to ‘Getting Started Manual’ of SD700, chapter ’12. FAULT MESSAGES.
DESCRIPTION AND ACTIONS’.
To Next Page
Loading...
